You’ve probably heard the old saying, “measure twice, cut once.” When it comes to installing turf, that adage is especially important. Accurately measuring the space you plan to install turf is crucial for a successful project.
In this comprehensive guide, we’ll show you how to properly measure your space and calculate the amount of turf you’ll need. We’ll also provide some helpful tips for getting an accurate measurement. By following these steps, you can be confident that your turf installation will go smoothly.
Determine the amount of space you have available for turf installation. This can be done by measuring the length and width of the area in question.
When determining the amount of space that is available for turf installation, accuracy is essential for the successful implementation of your project. The best way to know how much space you are dealing with is to take careful measurements of the area. Using a tape measure, create an outline of the perimeter in question and then use the length and width readings to arrive at an estimated square footage. It’s important to include in your measurements any natural curves or undulations, as this too will affect the total amount of space available. Doing so will help you determine precisely how much turf you need for your installation project—and ensure that nothing gets overlooked!
Add an extra 10-15% to your measurements to account for any irregularities in the shape of your space.
When it comes to artificial grass in Phoenix, you should always add an extra 10-15% to your measurements to ensure the perfect fit. This is especially important when measuring irregularly shaped areas since it helps create a much smoother look. The contingency from the extra measurements will also help make sure that the artificial turf isn’t pulled too tight and that its seams blend properly. It’s especially important to be precise when measuring artificial grass, so consider a professional installation if you’re unsure of what to do on your own..
Calculate how much turf you will need by multiplying the length and width of your space by the chosen turf’s coverage rate.
Calculating the number of turf pieces you need for your outdoor space is an easy two-step process! First, take the length and width of your desired space, and then multiply them together to get the square footage. Next, take your chosen turf’s coverage rate and multiply it by the total square footage to get the number of pieces you need. Be sure to round up any decimals over half a piece, as this will ensure that you have enough material to cover even difficult corners or the edges of your space. With these few steps, you’ll have exactly what you need to create the perfect outdoor oasis!
Purchase enough turf to cover the calculated area, plus an additional 10-15% for waste or mistakes.
When purchasing turf for your lawn, it’s important to take into account the amount of turf needed to cover the area you have calculated, as well as an additional 10-15% for any unforeseen waste or mistakes. Turf is most effective when laid down in large sections that can properly join together; this way soil and grass will work in harmony with each other to achieve the best possible result. Allowing yourself that extra 10-15% of turf also takes into account any minor inconsistencies or movements of the ground during installation. Ensure your project is foolproof by allowing a little extra space for mistakes, and you’ll soon have a lush green lawn without fail.
In conclusion, turf installation can seem daunting at first, but the proper planning and preparation can make it an easy and enjoyable process! By determining the amount of space you have available, factoring in irregularities in shape, choosing the right type of turf, calculating the necessary amounts of turf to purchase, and following the manufacturer’s instructions during installation, you are on track to having a beautiful lawn. With some patience and hard work, you will soon be able to enjoy your new turf!